Updating the Driver and Firmware
www.3ware.com 171
To update the 3ware driver and firmware using the update utility
1 Download and extract the driver files, as described under “Updating the
Driver and Firmware” on page 169.
2 Backup any critical data prior to updating the 3ware driver.
3 Log in to your system as system administrator.
4 Locate the folder that contains the driver files you extracted in step 1.
5 Double-click on the file
3wUpdate.exe.
You see a progress dialog box while the update utility checks your system
for the driver and firmware versions presently installed.
Figure 71. Update Utility Progress Dialog (System Check)
Note: At the end of this process, you may need to restart the system. Restarting is
always required if you update the firmware. In addition, if you boot from a unit on a
3ware RAID controller, updating the driver will require that you restart the system.
To Next Page
Loading...
