2 INTRODUCTION HoloSea S7
2.4 Recommended Extras (not included)
The following is a list of recommended extra components, suggested by 4Deep, to optimize the
use of your 4Deep HoloSea. Note that none of these are necessary for the use of the HoloSea
and the HoloSea is fully functional without.
• Molykote 44 Medium, for marrying the connectors (Subsection 3.1)
• Deployment rope/cord, to deploy the HoloSea (Section 3.4)
• A female-female Ethernet connector (ex: from a computer hardware store, shown in Figure
12)
• Lint-free wipes/swabs (ex: Kim-tech), for use in cleaning (Section 4)
• Glass/window cleaner, for use in cleaning (Section 4)
2.5 The Microscope and its Components
The HoloSea consists of 5 primary components:
1. Chamber 1: houses the laser point source
2. Chamber 2: houses the camera
3. Sample Space: connects the two chambers, determines the sample volume that will be
imaged.
4. Crown
5. Purge Valves
6
To Next Page
Loading...