3130
Instrument Settings
10.4 Operators
The Operators screen is used to manage the system
security settings and to manage the active operators.
Legend:
1. The list of operators
2. Delete selected operator (requires confirmation to
prevent accidental data loss)
3. Data Exchange: Clear, Import and Export Opera-
tors Lists here (available only to Supervisor and
Service level operators)
4. Filter
5. Access system security settings (available only to
Supervisor and Service level operators)
6. Move row cursor up one row
7. Edit the access level of the selected operator
8. Move row cursor down one row
9. Add new operator
10. Activate/deactivate operator reordering
ǽ The order of the operators that will be displayed on the Login screen can be
changed with the Move button. The button will only become active if there
is at least one operator listed that has the ‘Display on login screen’ option
checked.
11. Print operator list
12. Go back to the Settings screen
ǽ For more detailed information about the operator settings, please refer to the
full User Manual (See chapter 1.4 How to use this manual)
10.4.1 Operator access levels overview
Disabled operators cannot log in or perform any tasks.
This is the default access level. User-level operators can
perform the following routine tasks:
•
worklist management
testing
quality control
printing and exporting results
editing user options.
1
10
2
3
4
5
6
7
8
9
11
12
Fig. 21: The Settings »
Operators screen with its
function buttons labelled
To Next Page
Loading...
Need help?
General