77 ELEKTRONIKA DocUReader 2 PRO - Device Installation; Unpacking; Parts Checklist

98
Device installation
Component
Function
1. Printer cover
Flips up to receive printer paper
2. Printer cover button
Opens printer cover when pressed
3. Touchscreen
Serves as an interface with the user
4. Test strip tray
Holds and moves the test strip during the analysis process
5. Power socket
Allows connection to the AC adapter
6. PS/2 socket
Allows connection to a barcode reader or a keyboard
7. Serial interface
Allows connection to a PC or a host computer
8. Type B USB port
Allows connection to a USB-B cable and other peripheral
devices
9. Ethernet socket
Allows connection to an Ethernet network
10. Type A USB port
Allows connection to various USB peripherals
11. On/Off switch
Allows switching the unit on and off.
Use the connectors only with their appropriate plugs and operational
cables.
Use the On/Off switch to switch off the device only if the normal power-
ing down procedure fails.
ǽ The USB ports are compatible with FAT32, ext2, and ext4 file systems, but
not compatible with the NTFS file system.
3 Device installation
3.1 Unpacking
Read the DocUReader 2 Pro User Manual carefully before installation to
ensure proper operation of the analyzer from the outset.
Follow the specified installation instructions carefully. Otherwise, inac-
curate results or damage to the analyzer may occur.
Check the carton and instrument for visible signs of damage; if seen, contact the
carrier immediately.
Carefully remove the contents of the shipping carton, remove each of the wrap-
pings and check for the following items:
3.2 Parts checklist
• Intact DocUReader 2 Pro analyzer device
ǽ DocUReader 2 Pro is tamper-evident: There is a tamper-evident sticker next
to the power socket where the two panels join. Operational elements of the
device cannot be accessed without breaking the sticker.