6
Introduction
The following symbols appear on the device, its AC Adapter and its
packaging:
Double insulated product or
transformer. May also identify class 2
equipment (power supply only)
Indoor use only
Indicates that the instrument is
listed by Underwriters Laboratories
as meeting U.S. and Canadian
requirements for safety
The CE mark indicates that the
product complies with the applicable
directives of the European Union
Indicates that this product has been
tested to the requirements of CAN/
CSA-C22.2 No. 61010-1, second
edition, including Amendment 1, or
a later version of the same standard
includes the same level of testing
requirements
Indicates that this equipment is
classified as Waste Electrical and
Electronic Equipment under the
European WEEE Directive. It must
be recycled or disposed of in
accordance with applicable local
requirements
Direct current
Caution, consult accompanying
documents
MAC adress Consult instructions for use
Manufacturer Ethernet port symbol
Power on/off
IVD
In vitro diagnostic medical device
Handle with care Serial number
Temperature limitation Unique Device Identifier
Atmospheric pressure limitation USB port symbol
Suitable for near-patient use DC Adaptor Polarity Centre Positive
Keep away from rain This way up
Protect from sunlight and heat Stack no more than four (4)
Catalogue number Humidity limitation
Country of origin of the goods Date of manufacture
To Next Page
Loading...
Need help?
General