A.R.C. Laser FOX 514 - Reflecting Surfaces; Electrical Connection; Battery Pack

User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3 14
3.2.3 Reflecting surfaces
To avoid danger from reflected direct and scattered radiation, there must be no reflective
surfaces in the room.
These can be:
• Mirror
• Pictures behind glass
• Chrome surfaces
• Window
These surfaces must be removed or suspended or matted. In the area of laser use, only
matted, non-reflective and non-flammable instruments and materials should be used.
3.3 Electrical Connection
The laser is operated with a DC voltage of 19 V. The power is supplied by its external power
supply or its internal battery pack which can be charged by the external power supply unit.
A.R.C. Laser GmbH developed this internal battery pack specifically for this device. Only use
battery packs and power supplies made by A.R.C. Laser GmbH and obtained through the
authorized dealer.
The power supply unit can be connected to an AC voltage ranging from 100V - 240V
(50 Hz/60 Hz)
3.4 Battery pack
The FOX 514 has a lithium ion battery. If the battery pack is mishandled, the battery pack
can burst, cause a fire or even lead to chemical burns. Respect the following cautions.
• Do not disassemble. Do not handle damaged or leaking lithium ion batteries
• Do not crush and do not expose the battery pack to any shock or force such as
hammering, dropping or stepping on it
• Do not short circuit and do not allow metal objects to contact the battery terminals
• Do not expose to high temperature above 60°C (140°F) such as indirect sunlight or
place located in the sun.
• The battery may only be charged with a suitable power supply.
Disposal of waste batteries (applicable in the European Union and other European
countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided
with this product shall not be treated as household waste.
To ensure that the battery will be treated properly, hand over the product at end-of-
life to the applicable collection point for the recycling of electrical and electronic
equipment.