A.R.C. Laser FOX 514 - Programs and Settings; Display; Main Menu; Saving Parameters; Power Settings

User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3 31
6.3 Programs and Settings
6.3.1 Display / Main Menu
6.3.2 Saving parameters
How the parameters for power / pulse length / pulse interval can be changed is described in
the following three sections.
To store the modified parameters, please press the plus and minus buttons for adjusting the
aiming beam brightness for a few seconds. The saved parameters are stored as basic setting
when the device is switched on again.
6.3.3 Power settings
The power can be set by using the rotary wheel. Doing so,
the color of the value changes from black to white. In this
case, the font color of the power changes from black to white.
This color scheme can also be reversed if desired. For a
description see chapter 6.4.3.2.
The displayed value may vary from the emitted value at the
distal tip, by a range of ±20%.
Reset Button
Settings
Power
Pulse counter
Pulse pause
Modify values using the
arrows on the right
Pulse length
Decrease or increase of
chosen values using the
arrows on the left
Battery mode
Aiming beam brightness
Decrease or increase of brightness
when fiber is inserted using the
circular plus and minus buttons