50 Model 57i IP Phone User Guide
Softkeys
Configuring Park/Pickup using Softkey Configuration
Use the following procedure to configure the Park/Pickup call feature
using the softkey configuration method.
1. Click on Operation->Softkeys and XML.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab for parking a
call..
or
Select from "Key 1" through "Key 10" on the top tab for parking a call.
4. In the "Type" field, select Park.
5. In the "Label" field, enter a label for the Park softkey.
6. In the "Value" field, enter the appropriate value based on the server in
your network.
Note: For values to enter in this field, see the table "Park/Pickup Call Server Config-
uration Values" on page 47.
7. In the "Line" field, select a line for which to apply the Park configura-
tion.
8. If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the "Connected" state to apply to this soft-
key.
Aastra Web UI
To Next Page
Loading...
