Model 57i IP Phone User Guide 51
Softkeys
9. Pick another softkey (from top or bottom keys) to configure for Picking
up a call.
10.In the "Label" field, enter a label for the Pickup softkey.
11.In the "Value" field, enter the appropriate value based on the server in
your network.
Note: For values to enter in this field, see the table "Park/Pickup Call Server Config-
uration Values" on page 47.
12.In the "Line" field, select a line for which to apply the Pickup configura-
tion.
13.If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the "Idle" and "Outgoing" states to apply
to this softkey.
14.Click to save your changes.
15.Click on Operation->Reset.
16.In the "Restart Phone" field click to restart the IP phone.
To Next Page
Loading...
