116 Model 6753i IP Phone User Guide
Handling Calls
Handling Calls
When you are connected to a call, you can use the hard keys or programmable keys on the phone
to place a call on hold, transfer a call, or conference.
Placing a Call on Hold
You can place an active call on hold by pressing the Hold key. When you place a call on
hold, only your phone can retrieve the call.
When a call is on hold, the icon displays on-hook as follows.
For on-hold calls, the timer displays as running and the Line and main LEDs flash.
To place a call on hold
1. Connect to the call (if not already connected).
2. Press the Hold key.
The line/call appearance light begins to flash slowly and after a short time the phone beeps softly
to remind you that you still have a call on hold. The screen displays "Call Held" with the line
number the call is held at the phone.
IP Phone UI
Note: If you are connected to another call, the phone does not beep to remind
you that you still have a call on hold.
Call held
03:05
1
Jun 8 2:55pm
Call held
To Next Page
Loading...
