Model 6753i IP Phone User Guide 89
Line Keys and Programmable Keys
Speeddial/Xfer
The Speeddial key allows a number to be dialed quickly by pressing one key configured for
speeddialing. The Xfer key allows a call to be transferred to other recipients blindly or
consultatively. The Speeddial/Xfer key combines the Speeddial and Xfer key's functionality
together allowing the user to transfer calls or use Speeddial with one key.
Speeddial/Xfer Key Requirements and Functionality
The Speeddial/Xfer key has the following capabilities:
• Speeddial/Xfer and Speeddial
When the phone is in the “Idle” state, pressing the Speeddial/Xfer key causes the phone to go
offhook and dial the predefined extension.
• Speeddial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the call
to the predefined target.
If transferring a call fails, a message “Transfer Failed” displays, and you can reconnect the call
(get the call back) by pressing the line key again.
• Speeddial/Xfer and Call Forward
When the phone is in the “Ringing” state, pressing the Speeddial/Xfer key forwards the call to
the predefined extension.
Note: It is recommended that you enable the “Switch UI Focus to Ringing Line”
parameter when using the Speeddial/Xfer feature. For more information about
this parameter, see “Switch UI Focus to Ringing Line” on page 174.
To Next Page
Loading...
