234 Model 6757i CT IP Phone User Guide
Pairing and Unpairing Cordless Handset to Base
Pairing and Unpairing Cordless Handset to Base
Pairing/Unpairing the Handset
All handsets must be paired to a base station. You must perform this from both the telephone
base station and the cordless handset. Successful pairing adds the handset name to the handset
list on the base station and synchronizes the handset list from the base to the newly paired
handset. A total of four handsets can be paired to a single base station.
Unpairing of the Handset can be done from either the cordless Handset OR the base station.
However, if the Handset is out of range, and you perform unpairing from just the Handset OR
just the base station, the device that you performed unpairing on is unpaired, but the other device
remains paired. If communication between the base station and the Handset is lost, you must
perform unpairing on the other device as well.
Pairing the Handset to the Base Station
1. On the base station, press (Options).
2. Select Preferences->Handset Pairing.
Note: When performing the handset pairing or unpairing, it is recommended that
the handset be within 3 feet of the base station.
Base Station and Handset UI
Preferences
1. Tones
2. Contrast Level
4. Live Dialpad
5. Set Audio
6. Time and Date
7. Lanaguge
8. Handset Pairing
- Select
Done -
3. Speed Dial Edit
To Next Page
Loading...
