266 Model 6757i CT IP Phone User Guide
Additional Features
Configuring Group RTP Paging
Use the following procedure to configure RTP streaming on the receiving end for Paging
applications using the Aastra Web UI.
1. Click on Basic Settings->Preferences->Group Paging RTP Settings.
2. In the “Paging Listen Addresses” text box, enter the multicast IP address(es) and port
number on which the phone listens for incoming multicast RTP packets.
Enter the IP address in dotted decimal format.
(for example, 239.0.1.15:10000,239.0.1.20:15000)
You can enter up to 5 listening multicast addresses.
If this field is blank, the Paging Listening capability is disabled on the phone.
3. Click to save your settings.
Aastra Web UI
Notes:
1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore
any incoming pages.
2. For incoming Paging, the phone uses the Intercom configuration settings. The
incoming Page is dependant on the “Allow Barge-In” parameter setting and the
“Idling/On Call” state.
Group Paging RTP Settings
To Next Page
Loading...
