Aastra 6867i - Key Description

IP Phone Keys
4 41-001524-00 REV00 – 04.2014
Key Description
The following table describes the keys on the 6867i:
Key Description
Goodbye Key - Ends an active call. The Goodbye key also exits an open list, such as the Options List, without saving
changes.
Hold Key - Places an active call on hold. To retrieve a held call, press the Hold key again or press the Pickup softkey
offered on the display.
For more information, see “Placing a Call on Hold” on page 110.
Options Key - Accesses services and options to customize your phone. Your System Administrator may have already cus-
tomized some of your settings. Check with your System Administrator before changing any Administrator-only options.
For more information, see “Phone Options via the IP Phone UI” on page 17.
Mute Key - Mutes the microphone so that your caller cannot hear you (the light indicator flashes when the microphone
is on mute).
For more information, see “Mute” on page 108.
Volume Controls - Adjusts the volume for the handset, ringer, and handsfree speakerphone.
Callers List Key - Accesses a list of the last 200 calls received.
For more information, see “Callers List” on page 130.
Redial Key - Accesses a list of the last 100 previously dialed numbers. Pressing the Redial key twice redials the last dialed
number.
For more information, see “Redial” on page 105.
Line/Call Appearance Keys - Connects you to a line or call. The Aastra 6867i IP phone has two default Line keys, each
with LED indicator lights.
For more information, see “Line and Call Appearances” on page 55.
Speaker/Headset Key - Transfers the active call to the speaker or headset, allowing handsfree use of the phone.
For more information, see “Using Handsfree Speakerphone” on page 103.
Directory Key - Accesses a directory of names and phone numbers (stored in alphabetical order).
For more information, see “Directory” on page 122.
Navigation Keys/Select Button - Multi-directional navigation keys allow you to navigate through the phone’s user
interface. Pressing the center Select button selects/sets options and performs various actions (such as dialing out when
in the Directory, Callers, and Redial Lists).
For more information, see “UI Navigation” on page 15.
Transfer Key - Transfers the active call to another number.
For more information, see “Transferring Calls” on page 111.