EasyManuals Logo

Aastra 6867i User Manual

Aastra 6867i
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Configuring Softkeys
84 41-001524-00 REV00 – 04.2014
Speed Dial/Xfer
The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Transfer
key allows a call to be transferred to other recipients blindly or consultatively. The Speed Dial/Xfer key combines the
Speed Dial and Transfer keys’ functionality together allowing the user to transfer calls or speed dial with one key.
Speed Dial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key causes the
phone to go offhook and dial the predefined extension.
Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed Dial/Xfer key blind
transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the call back) by
pressing the line key again.
Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed Dial/Xfer key forwards
the call to the predefined extension.
Configuring a Speed Dial/Xfer Key Using the Aastra Web UI
Note:
It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the Speed Dial/Xfer
feature. For more information about this parameter, see “Switch UI Focus to Ringing Line on page 152.
Aastra Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Speed Dial/Xfer.
4. In the Label field, enter a label for the Speed Dial/Xfer key.
5. In the Value field, enter the speed dial extension or the extension to transfer calls to (for example, 3600).
6. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
global
1 through 9

Table of Contents

Other manuals for Aastra 6867i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aastra 6867i and is the answer not in the manual?

Aastra 6867i Specifications

General IconGeneral
Bluetooth SupportNo
WirelessNo
Ethernet PortsDual 10/100/1000 Mbps Ethernet ports
Audio CodecsG.711, G.722, G.729
Power over EthernetYes
Headset PortYes
ProtocolsSIP
SpeakerphoneFull-duplex speakerphone
Expansion ModuleYes
Lines6 lines

Related product manuals