Configuring Softkeys
94 41-001524-00 REV00 – 04.2014
Conference Key
By default, the 6867i has a dedicated Conference key. However, using the Aastra Web UI, you can assign the Conference
key to any key on the left or bottom keys on the phone.
Configuring a Conference Key Using the Aastra Web UI
Note:
For more information about conferencing, see “Conferencing Calls” on page 116.
Aastra Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Conference.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 16.
7. In the Type field, select Conference.
8. Click Save Settings.
To Next Page
Loading...
