Start the Phone – Log On/Off
Dialog 4422 IP Office22
Continued startup procedure
The display shows:
The x indicates a timer counting down from 5 seconds. If no key is
pressed during this time, “no change” is selected automatically.
Notes:
You can speed up the procedure by pressing the Speaker
key.
The administrator mode is used to change the IP settings in
your phone. This mode is reserved for your system
administrator.
The display now indicates that the phone is connecting to the
server and the software is loading. This takes about 1 minute. After
a self test, the phone is ready for use or ready for log on. To log on,
see section “Log on” on page 24.
Use administrator mode
to change IP settings (x)
To Next Page
Loading...
Need help?
General