87Dialog 4422 IP Office
Settings
Change ring signal for a Monitoring key
The Monitoring keys are programmed by your system
administrator, however you can change the type of ring signal from
your phone. See also section “Key Monitoring” on page 73.
Change the type of ring signal
Settings Ô Press.
The Function Keys menu or the Programmable Keys menu is
framed.
Press.
Ô Press the Monitoring key to program.
The extension number of the phone that is monitored is shown
together with the current type of ring signal for the key.
ì
Press (+) to change.
ì Press to change between the ring signals.
• Silence.
• Periodic (repetitive) ring signal.
• Delayed periodic ring signal.
• One muted ring signal. Only one ring signal with a low level.
• One muted delayed ring signal.
Note: The Clear key can be used to leave the menu without
saving the changes.
Press to store the framed ring signal.
Press to return to the previous menu,
or
Settings ÕÔ press to return to idle mode.
Monitored number: 3223
Periodic
To Next Page
Loading...
