Call Forwarding Services
MD Evolution – Dialog 4425 IP Vision104
Deactivating a Call Forward Pre-Defined
on the Call-Fwd Key
On the other hand, to deactivate a pre-defined call forward
assigned to the Call-Fwd (call forward) key on your extension:
Call-Fwd ÕÔ Simply press the Call-Fwd key on your extension, which
initially is turned on.
The pre-defined call forward is immediately cancelled, and confirmed
to you with the service acceptance tone, and the display of “CANCEL
ACCEPTED CALL FORWARD” message on your extension’s
screen.
Call-Fwd Ô This change in status will also cause your extension’s Call-Fwd key
LED to turn off. In your extension’s service programming menu, the
“UNACTIVE” status is also displayed to the right of the “2 Call
forward” option.
Call Forward on Mini-Message or Absence
As an alternative to all other available variable call forwarding services
(referred to above), you may also re-direct your extension to a mini-
messaging or call forward on absence service.
This does not consist of a call forward in its truest sense: your
incoming calls are not re-directed.
Rather, the absence message that you selected when defining the
call forward will be automatically transmitted to all internal and
external parties who are trying to reach you, in the form of an ISDN
mini-message, as long as that party’s phone is compatible with the
service. His/her call will be disconnected once the message has
been displayed.
For this purpose, your facility may make 10 pre-formatted mini-
messages available to you, or you may also create personalised
messages.
To Next Page
Loading...
Need help?
General