103MD Evolution – Dialog 4425 IP Vision
Call Forwarding Services
Cancelling a Variable Call Forward
A temporary variable call forward is shown on your extension by a
flashing Call-Fwd key.
To cancel this call forward:
Call-Fwd ÖÔ Simply press the Call-Fwd key on your extension.
The variable call forward is immediately cancelled, and confirmed
to you with the service acceptance tone, and the display of the
“CANCEL ACCEPTED CALL FORWARD” message on your
extension’s screen.
Call-Fwd Ô This change in status will also cause your extension’s Call-Fwd key
to turn off. If you return to your extension’s services programming
menu, the “UNACTIVE” status will be also displayed to the right of
the “2 Call forward” option.
Note: As an alternative, you may also access your exten-
sion’s variable call forward programming menu, and select
the “7 Cancel forward” option. The result will be the same.
Activating a Call Forward Pre-Defined on
the Call-Fwd Key
You may also pre-define and assign a variable call forward to the
Call-Fwd key on your extension. See the “Programming Your
Extension’s Services” section.
This enables you to quickly activate or deactivate a variable call
forward that you use frequently, for example to your secretary.
To activate this pre-defined call forward:
Call-Fwd Ô Simply press the Call-Fwd key on your extension, which
initially is turned off.
This pre-defined call forward is immediately activated, and confirmed
to you with the service acceptance tone, and the display of the
“…CALL FORWARD ACCEPTED” message on your extension’s
screen.
Call-Fwd ÕÔ This change in status will also cause your extension’s Call-Fwd key
LED to turn on. In your extension’s services programming menu,
the “ACTIVE” status is also displayed to the right of the “2 Call
forward” option.
To Next Page
Loading...
Need help?
General