107MD Evolution – Dialog 4425 IP Vision
Call Forwarding Services
Select Press the dynamic function key shown on the left.
Your extension’s service programming welcome screen is
displayed once again, with the “ACTIVE” status displayed to the
right of the “2 Call forward” option.
Press and hold the centre navigation key on your extension
for 2 seconds.
Your extension returns to the idle status.
Call-Fwd ÖÔ The call forward on absence that you have just defined is effective
immediately. As a result, your extension’s screen will display the
type of call forward on absence you defined – “Msg”. As with any
other variable call forward, your extension’s Call-Fwd key will also
flash.
An internal party who attempts to contact you from an extension
capable of receiving mini-messages will then be displayed your
absence message.
This may also be the case for an external ISDN party that is com-
patible with the mini-messaging service, assuming that he/she is in
fact an ISDN network user, and that he/she also uses an ISDN
terminal that is compatible with the mini-messaging service. This
also assumes that your extension is not specifically and permanently
protected against the use of this call forward on absence service
for external parties.
In the opposite case, a call issued from an incompatible external
party will be redirected to your facility’s attendants, who will see
your absence message that is automatically displayed on their
extension, and will be able to accurately inform your external calling
parties.
Note: A call forward on absence is cancelled in the same
manner as any other type of variable call forward – see
previously mentioned details.
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
CallFwd with msg 405
Log off 3 Missed
To Next Page
Loading...
Need help?
General