137MD Evolution – Dialog 4425 IP Vision
Group Services
Notes:
The simplified call pick-up described above applies both if
the call that is picked up is for the group involved, or is a
personal call for a member of the involved group.
If several calls are ringing within the same group, the oldest
call will be automatically selected. If several calls are ringing
within different secondary groups, the call that is picked up
will be automatically selected by the system.
Your extension may also be subject to call pick-ups from
third party sets that belong to the same group as you.
The prefix “14” is the one usually used to access the call
pick-up service within a primary group. It may, however,
have been modified by your system administrator. The call
pick-up access prefix within secondary groups differs from
one facility to another.
Standby Status within a Hunt Group
When you belong to one or several hunt groups, you may also
manage your availability for answering calls that are directed to
your group(s).
This standby service enables you to temporarily withdraw from a hunt
group. Therefore, you would only receive personal calls, or those that
are directed to the groups from which you have not withdrawn.
Once again, the system distinguishes your position in relation to
your primary group as well as your secondary groups.
To manage your standby status in relation to your primary group,
from your idle extension:
Menu Press the Menu key on your extension.
You are granted access to the programming of your extension’s
services and the following screen is displayed.
PROGRAMMING
0 General calling ACTIVE
Hunt group ACTIVE
2 Call forward UNACTIVE
3 Appointment reminder UNACTIVE
4 Prefixes consultation
Options ÛÞ Select
To Next Page
Loading...
