Aastra Dialog 4425 IP Vision User Manual

Services Reserved for Attendants
MD Evolution – Dialog 4425 IP Vision190
2timesÞ Press twice the dynamic function key shown on the left in
order to highlight the number “3”, which corresponds to the
general call forward service for your facility.
Select Press the dynamic function key shown on the left.
Your position then displays the type of call forward requested.
Press the dynamic function key shown on the left.
Your position then prompts you to identify the number or name of
the external recipient for your facility’s general call forward.
To define the number to receive the call forward:
FWD NO z Dial the external number for the call forward recipient.
To do so, using your position’s keypad, hold each key down for
approximately 2 seconds, and, if necessary, use the “Erase” option
to cancel the last character entered.
This number may contain up to 18 digits. It should be dialled without
the “0” public network access prefix, since the system will automati-
cally take it into account.
Þ Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.
The dynamic option “Erase” becomes “Select”.
Select Press the dynamic function key shown on the left.
The purpose of this is to validate your entry, and then your extension
displays its acceptance of your service programming (see details to
follow).
CALL FORWARD INSTALLATION
Immediate
2 Cancel forward
BACK
Options ÛÞ Select
1
CALL FORWARD INSTALLATION - IMMEDIATE
Input a number: <0164477500>
Input a name: < >
OK
Options ÛÞ Select
OK

Aastra Dialog 4425 IP Vision Specifications

General

Brand	Aastra
Model	Dialog 4425 IP Vision
Category	IP Phone
Language	English