23MD Evolution – Dialog 4425 IP Vision
IP Declaration and Start-Up of Your Extension
Note: Similar parameters are used for the IP configuration
of your desktop PC. These are accessible from your PC’s
“Control Panel”, under “Network Connections”.
Proxy Server Sometimes used to define the existence of a proxy server that is
used by your company’s network IP equipment to access the
Internet network.
Generally speaking, this parameter is not used by your extension,
so the value is “No”.
In the case where the existence of a proxy server has been validated,
and the value is “Yes”, two additional parameters prompt you to
manually identify the IP address and IP port that the proxy server
uses.
Gatekeeper Discovery For any IP extension within your MD Evolution system, the value of
this parameter must be “By default (No)”.
This indicates that the IP address for your MD Evolution’s xMV
equipment that implements the system “IP H. 323 gatekeeper”
and to which your extension connects to be authenticated is
automatically recovered from its configuration file, upon start-up.
Gatekeeper Defines the IP address for your MD Evolution’s xMV equipment
that implements the system “IP H. 323 gatekeeper” and to which
your extension connects to be authenticated.
In conjunction with the previous parameter, this IP address is
defined automatically when your extension is started up.
Password For any IP extension within your MD Evolution system, the value of
this parameter must be “Yes”.
The user of any IP extension, you included, must enter his/her
user password in order to be securely authenticated within the
system. See the “Logging on and Logging off Your Extension”
section.
Settings Application of Parameters
To Next Page
Loading...
Need help?
General