Aastra Dialog 4425 IP Vision User Manual

IP Declaration and Start-Up of Your Extension
MD Evolution – Dialog 4425 IP Vision24
Starting up Your Extension’s Services
During the initial setup of your Dialog 4425 IP Vision, once its IP
network parameters have been defined, your extension will be
automatically restarted.
The process for starting up your extension is illustrated below, even
though it is entirely automatic.
The first screen that is displayed enables you to, if necessary, return
to the modification of your extension’s IP configuration by simul-
taneously pressing and holding the “C”, “*” and “5” keys for
approximately 1 second, within 5 seconds of signing on.
If a DHCP server was configured, your extension will then be
connected to this DHCP server to recover its IP address. The
second screen illustrated below is then displayed:
Settings CallList  PhoneBook WAP Services
AASTRA //
User administrator mode to change IP settings
(x)
(No change)
Settings CallList  PhoneBook WAP Services
AASTRA //
Connecting to DHCP server

Aastra Dialog 4425 IP Vision Specifications

General

Brand	Aastra
Model	Dialog 4425 IP Vision
Category	IP Phone
Language	English