Aastra Dialog 4425 IP Vision User Manual

71MD Evolution – Dialog 4425 IP Vision
Operations during a Call
To place an enquiry call, whether you are in handset or handsfree
mode:
L3 Ô Press a free line key of your extension for which LED is not lit.
Your extension prompts you to dial the number for the second
internal or external party you would like to reach.
Your first caller is automatically placed on hold, and the key repre-
senting the line on which the first call was placed will flash quickly.
NO TO CALL z Dial the number for the new party.
As indicated, you may use any dialling methods otherwise available
when placing a single call.
Call Press the dynamic function key shown on the left.
You then follow the placement of this call in the same way as for a
single outgoing call.
Supposing that your first call is an internal call, you still have the
same services available to you for placing the second enquiry call
(depending on the second party’s status), as you would during a
single call (see also “Operations for Outgoing Calls”). Thus, you
can:
• Be placed on automatic camp-on if the new calling party’s
extension is busy.
• Activate the automatic call-back feature for the new called
extension that is busy, or not answering.
L1 ÕÔ Note: Rather than initially selecting a free line key (for which
LED is not lit, you may press the line key for the current call
(for which the LED is lit).You can also select the “Conf/
Transf” dynamic function key usually displayed on your
extension. The rest of the procedure is carried out as
described.
Settings CallList   PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
Enter number: _ 405

Erase Call
Settings CallList   PhoneBook WAP Services
FREE 15:49 07 Nov 2008
SMITH Peter
MARTIN Vincent 423 405

CALL_BACK
Conf/Transf

Aastra Dialog 4425 IP Vision Specifications

General

Brand	Aastra
Model	Dialog 4425 IP Vision
Category	IP Phone
Language	English