16
WARNING - Never short-circuit or connect the poles of the battery pack to avoid
electric shocks!
CAUTION - Plug-in contacts must be dry!
5.2 Battery pack
Place the battery pack in
the battery bag and x
with Velcro.
Insert the interface .
Setting the driving mode –
Lithium-ion battery pack
Loosen the screws.
Turn and insert the safety
edge. Note arrows – plane
crossed out!
Tighten the screws.
Check the battery pack.
Press the info button.
(Lithium-ion battery only)
Green = battery full Yellow = battery low
» Charge if necessary!
Red = battery empty
» Charge it!
Setting the driving mode (pictures 1 - 3, only for lithium-ion battery pack)
To Next Page
Loading...
