EasyManua.ls Logo

AAT SOLO - Charger Information and Cleaning

AAT SOLO
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
9.2 Cleaning
WARNING – No moisture must be allowed to enter the interior of the device!
This may result in electric shocks! Use only damp cloths for cleaning the device’s surface!
Never use wet cloths!
WARNING – Test all safety-relevant functions after cleaning!
WARNING – Do not smoke during cleaning!
i
NOTE – Keep SOLO away from sources of ignition!
i
NOTE – Clean the drive unit, tooth segments and drive shafts in the event of
dirt/deposits!
i
NOTE – Clean the wheelchair according to the manufacturer’s information!
i
NOTE – Do not use a high-pressure cleaner!
If you wish to disinfect SOLO,
use common household
disinfectants and perform a
wipe disinfection.
» Observe the manufacturer’s
information.
Clean the SOLO
surfaces with common
household cleaning agents.
» Observe the manufacturer’s
information.
Information on the charger
i
Note - Observe the manufacturer’s information in the chargers user manual!
SOLO L charger
» Lithium-ion battery pack
» Battery capacity 16 Ah.
Possible error
LED does not light up.
Contact the manufacturer!
SOLO B charger
» Lead gel battery pack
» Battery capacity 9.5 Ah.
» Incl. plug attachment

Other manuals for AAT SOLO