5
1 Symbols and safety instructions
DANGER – Immediately imminent danger
If not avoided, this will result in death or severe bodily injuries!
WARNING – Possible imminent danger
If not avoided, this may result in death or severe bodily injuries!
CAUTION – Possible imminent danger or harmful situation
If not avoided, this may result in minor bodily injuries or damage to property!
i
NOTE – Manufacturer’s information
General safety instructions
i
NOTE
If you have visual impairment, this user manual can be downloaded at:
www.aat-online.de/de/bda/SOLO .
Read the user manual prior to start-up and observe the warning notices and safety instructions.
In the event of reading diculties, training contents must be broadened verbally.
The user manual must be kept in a safe place after reading through it.
Contains some ammable materials. Keep SOLO away from sources of ignition.
SOLO can interfere with highly sensitive electromagnetic elds of other electronic devices
(e.g. anti-theft devices).
Stability tests were performed under laboratory conditions. SOLO can behave dierently under
real conditions compared to laboratory tests.
Training may only be carried out by the manufacturer, the AAT eld sta or the qualied specialist shop.
CAUTION
External heat sources may cause the surface temperature to rise (e.g. sunlight)!
Do not touch the aected surfaces in this case to avoid burns!