35
9.6 Reuse (change in operator)
The term reuse is used when the AAT product of patient X is to be used for another patient Y. In addition,
there is a reuse when a patient receives a dierent wheelchair and therefore requires new add-on parts.
Please contact the manufacturer, the AAT eld sta or the authorised specialist shop.
SOLO is suitable for reuse.
A technical safety test and
cleaning/disinfection work
should be performed prior to
each reuse. (see chapters 9.5
and 9.2)
i
9.7 Corrective action/recall
If new important safety information regarding the handling of your product is available, we will inform you
about this. As already stated at the beginning, you will always nd the latest version of this user manual
on our homepage.
Should any subsequent changes be made to the product or corrective action be taken, we will inform our
authorised dealers in writing about all the aected serial numbers. If your product is aected by a recall,
you will subsequently be informed about all further steps to be taken.
To Next Page
Loading...
