+33 4 7642 9550 www.aaton.com Cantar-X User Manual v2.26 (r13) 2009 April 27
p.10
p.10
OPERATING WEST POSITIONS
MainSelector positions
The [MainSelector] is easy to manipulate even while wear-
ing heavy winter gloves; it gives direct access to all essential
functions.
The OPERATING (West) positions control the recording, an-
notation and playback of audio files. To get access to the
Rec&Play positions, press and hold the blue [shift] button
while rotating the [MainSelector] (p.48 & p.49).
The OPERAND (East) positions, which establish Cantar's oper-
ating parameters, are described on p.26.
Standard positions Rec&Play positions
REC
•
BLUE-REC
PPR
(
BLUE-PPR
TEST
I I
BLUE-TEST
STOP
IIII
PLAY >
BLUE-PLAY
BROWSE
I< BLUE-BRWS
MainSelector buttons
[black], [silver] and [gold] buttons can be activated by the
thumb, while the blue [shift] button may be pressed by the
index-finger.
[silver] in REC, insert a marker on-the-fly.
in TEST, after [routing] opens routing creation
(coming soon)
in PLAY, go to operator's record-markers.
[shift] [silver] in REC, trigger AutoSlate detection.
in PPR, toggle take editor (PREV/NEXT take).
in TEST, open LEVEL
&DELAY menu.
in PLAY go to AutoSlate marker.
[black] in REC, PPR, TEST, talkback mic activation.
in PLAY, inserts a play mark.
in BLUE-PLAY, inserts a cue-in.
in IN-GRIDS, links an input to a track.
in OUT-MAPS, connects audio sources to outputs.
[shift] [black] in REC, PPR, TEST talkback mic to active tracks.
in PLAY, plays from start of take.
[gold] in REC, PPR, BROWSE, changes take-type.
in BLUE-PLAY, inserts a cue-out.
in IN-GRIDS, unlinks an input from a track.
in OUT-MAPS, disconnects sources from outputs.
[shift] [gold] in TEST, PPR,REC, 1kHz reference tone:
'OFF' at [gold] release, remains 'ON' if [shift]
released first, press [shift] to turn 'OFF'.
in BLUE-PLAY, hide play-card from Rec&Play list.
To Next Page