ABAC FORMULA Series - Safety Precautions; General Precautions; Safety Precautions for Maintenance Operations

P. 28 - Chap 5 Safety precautions
5
Safety precautions
G
B
5.1
General precautions
Use of the machine by unskilled personnel without adequate supervision is not allowed.
Keep children and animals away from the working area.
Do not direct compressed air jets towards yourself or other people.
Always use goggles to protect your eyes from objects which can be lifted by the jet of air.
Never operate on the machine with bare feet or wet hands.
The compressor is designed solely to produce compressed air and cannot therefore be used for
any other type of gas.
The compressed air produced by the machine cannot be used for respiratory assistance,
pharmaceutical or sanitary purposes or in production plants where the output air comes
into direct contact with food products unless an additional adequate air treatment system
is employed
The air taken in by the compressor must be absolutely free of dust, vapours, explosive or fl ammable gases,
solvents or powder paints and toxic fumes of any type.
Use of compressed air requires knowledge of and compliance with the safety precautions to be adopted for the
individual applications (infl ating, pneumatic tools, painting, washing with water-based detergents only, etc.).
Machine operation is fully automatic.
The machine carries out the various work cycles, as required by the user, according to the settings.
After use, stop the machine and disconnect the main panel power.
Use of the machine for other purposes shall be considered as improper use and the Manufacturer shall not
be liable for any resulting damage or injury.
5.2
Safety precautions for maintenance operations
Routine maintenance operations can be carried out by the user as described in this handbook.
Only the use of original spare parts will guarantee long, safe and reliable service life of the equip-
ment
Refer to Chapter 10 for instructions on the operations that can be carried out by the user.
All major maintenance operations can be carried out only by the specialised personnel of
authorised Service Centres