ABAC FORMULA Series - The Machine Is Ready for Start or Is Running and the Scheduled Maintenance LED Is on; The Machine Is Ready for Start or Is Running with Critical Functioning Message

P. 64 - Chap. 9 Troubleshooting
G
B
V-F V-V Segnalazione Possibile causa Intervento
X X
Excessive FA clogging
Replace FA
(see. par. 10.4)
Belts slipping
Call Customer
Service Centre
9.4
The machine is ready for start or is running and the
scheduled maintenance LED is ON
V-F V-V Indication Possible cause Intervention
X X
L2 flashing
DI indicates:
“Replace air filter
excess. clogging”
FA clogged
Replace FA
(see. par. 10.4)
X X
L2 flashing
DI indicates:
“Replace air filter
XXX excess hours”
FA
to be replaced for
scheduled maintenance
Replace FA
(see. par. 10.4)
X X
L2 flashing
DI indicates:
“Replace oil filter
XXX excess hours”
FO to be replaced for
scheduled maintenance
Replace FO
(see. par. 10.6)
X X
L2 flashing
DI indicates:
“Replace oil
XXX excess hours”
Oil to be replaced for
scheduled maintenance
Replace oil
(see. par. 10.5)
X X
L2 flashing
DI indicates:
“Replace oil separator
XXX excess hours”
FD to be replaced for
scheduled maintenance
Replace FD
(see. par. 10.6)
X X
L2 flashing
DI indicates:
“Replace dryer filter
XXX excess hours”
Dryer filters
to be replaced for
scheduled maintenance
Call Customer
Service Centre
9.5
The machine is ready for start or is running with
critical functioning message
V-F V-V Indication Possible cause Intervention
X X
L2 flashing
DI indicates:
“Ambient
temperature low”
Ambient temperature low Heat ambient
X X
L2 flashing
DI indicates:
“Compression temp.
High.”
Oil cooling low
Check functioning of the
electric fan and its fuses
FU3.
Call Customer
Service Centre
Oil radiator dirty
Call Customer
Service Centre
Oil low
Top up or change oil
(see. par. 10.5)