P. 70 - Chap. 10 Maintenance
G
B
-
Operation Reference
To be carried
out by a
Service Centre
After the
first
100 hours
After the
first
1000 hours
Every
500
hours
Every
1000
hours
Every
2000
hours
Every
4000
hours
Overhaul minimum
pressure valve
•
Overhaul
intake valve
•
Replace
oil filter
10.6
• • •
Check - top up
oil level
10.5
• • •
Change
oil
10.5
•
Replace
separator filter
10.6
•
Check
oil recovery system
• •
Check
fitting tightness
• • •
Check
electrical terminal
connections
• • •
Drain
air-oil receiver
condensate
10.7
• • •
Clean
radiators
• •
Clean
dryer condenser
• •
Replace
air dryer filters
• •
Check
belt tension and wear
• • •
Replace
drive belts
•
Check
settings and
adjustments
•
Check
safety device
operation
•
*
This frequency relates to operation in normally dust environments. In the case of critically dust
environments, the control panel may signal the need to replace the air filter before the scheduled maintenance
time. In this case, replace the filter as soon as possible. The skilled personnel employed for installation will
be able to objectively evaluate the environmental conditions
To Next Page
Loading...
