Abaxis VetScan HM5 - General Settings Adjustment

Settings 3-3
3. Adjust the printer settings as needed:
 Device: selects printer, print mode, and paper type.
 Printout: sets units and margins for printouts.
 Format: selects the items included with printed results.
 Header: sets up to 7 lines of customer information used at
the top of the printout.
 Automatic Print: enables automatic printing of results after
CBC runs. (Disable if combining with VS2 results to avoid
multiple printouts.)
3.3 General Settings
Use General Settings to adjust sound, language, export format, screen saver time, and standby.
1. From the Home screen, select Settings > General Settings.
2. Select the settings to adjust:
 Sound: enables/disables sound.
 Language: selects the language used in analyzer displays.
 Data Export Format: selects the format for exported data (Advanced is recommended).
 Screen Saver Time: sets the delay time for screen saver activation, in minutes.
 Standby Time: sets the delay time for standby activation, in minutes.
3.3.1 Screen Saver and Standby Time
1. From the Home screen, select Settings > General Settings.
2. Select Standby Time , then enter the standby time in minutes.
3. Select Screen Saver Time , then enter the time before the screen
saver activates, in minutes.
4. Select Accept .