Abaxis VetScan HM5 - User Permission Levels Explained

7-2 User Permissions
7.1 User Permission Levels
The HM5 software provides for three levels of users: Basic, Advanced, and Admin.
7.1.1 Basic Level
Basic users can perform the following:
 Measure blanks and run CBCs
 Perform scheduled maintenance
 Change reagent packs
 Run QC control on previously entered QC lots
 View, print, and save CBC results
7.1.2 Advanced Level
Advanced users can perform all functions available to Basic Users, as well as the following:
 Load new QC lot values
 Calibrate the analyzer
 Adjust all settings other than Admin settings (schedule maintenance)
7.1.3 Admin Level (Default)
Admin users can view and operate all functions in the analyzer, and have access to all settings.
The default user level is Admin.