Section 4
Running a Sample 4-1
Running a Sample
Running a sample on the HM5 is a simple process that begins
with good sample draws, proper mixing, and correct storage of
the samples.
Section Contents
4.1 Collecting and Handling Samples . . . . . . . . . . . . . . . . .
4-2
4.2 Storing Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3
4.2.1 Remixing Before Running . . . . . . . . . . . . . . . . . .
4-3
4.3 Before Performing an Analysis . . . . . . . . . . . . . . . . . . .
4-4
4.3.1 Daily Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4
4.3.2 Check Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4
4.4 Running a Blank Measurement . . . . . . . . . . . . . . . . . .
4-5
4.5 Running a Sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7
4.6 Adjusting the Lyse Volume . . . . . . . . . . . . . . . . . . . . . .
4-9
4.7 Interpreting Results . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-9
4.7.1 Histograms . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-10