ABB 630 series - Connecting RTD Input and Ma Outputs

Terminal AIMA04A
1KHL178012R0005
AIMA06A
1KHL178012R0012
AIMA05A
1KHL178012R0013
X102-3, 4 CT CT CT
X102-5, 6 VT
CT
S
1)
CT
X102-7, 8 VT VT VT
X102-9, 10 VT VT VT
1) Current Transducer for 0.1 A / 0.5 A
See the technical manual for the specific card variants.
5.4.2 Connecting RTD input and mA outputs
Table 6: REM/ REF/ RET630 module inputs, 4U half 19”
Terminal 600RTD01
X316 – 1,2,3 Sensor/ R/ V/ mA input
X316 - 4 GND
X316 – 5,6,7 Sensor/ R/ V/ mA input
X316 – 8,9,10 Sensor/ R/ V/ mA input
X316 – 11 GND
X316 – 12,13,14 Sensor/ R/ V/ mA input
X316 – 15,16,17 Sensor/ R/ V/ mA input
X316 – 18 GND
Table 7: REM/ REF/ RET630 module inputs, 4U half 19”
Terminal
600RTD01
X319 – 1,2,3 Sensor/ R/ V/ mA input
X319 – 4,5,6 Sensor/ R/ V/ mA input
X319 – 7 GND
X319 – 8,9,10 Sensor/ R/ V/ mA input
Table 8: REM/ REF/ RET630 module inputs, 6U half 19”
Terminal
600RTD01
X321 – 1,2,3 Sensor/ R/ V/ mA input
X321 - 4 GND
X321 – 5,6,7 Sensor/ R/ V/ mA input
X321 – 8,9,10 Sensor/ R/ V/ mA input
X321 – 11 GND
Table continues on next page
1MRS755958 C Section 5
Connecting
630 series 43
Installation Manual