Section 7 Removing, repairing and exchanging
7.1 Product lifecycle
In the product lifecycle, there is going to be a time to upgrade the IED to a next
generation unit. At some point of the product lifecycle, the IED will be upgraded to
a next generation unit. When selecting the original product, already consider the
upgrading and extension possibilities that the specific product offers for its whole
lifecycle.
IED-specific options can be found from Retrofit Solutions Database on the Internet
www.abb.com by following the links within ABB Service Guide or via ABB
Product Guide from the product specific Service & Support sheet.
7.2 Checking IED information
The IED information includes detailed information about the device, such as
version and serial number.
1. Select Main Menu/Information.
2. Select a submenu with
and .
3. Enter the selected submenu with
.
4. Browse the information with and .
The Product identifiers submenu contains product related information including
product type, serial number, order number, production date and SW version.
The HW modules submenu contains information about the HW modules.
7.3 Removing the IED
Before removing the IED, make sure that auxiliary power is turned off and all
wiring is disconnected.
Check with your local ABB if the IED can be upgraded.
1MRS755958 C Section 7
Removing, repairing and exchanging
630 series 65
Installation Manual
To Next Page
Loading...
