ABB 630 series - Wall Mounting the Main Unit

4.3.5.3 Wall mounting the main unit
1. Drill screw holes according to the dimensional drawing.
2. Mount the mounting brackets using the required screws.
3. Fit the main unit of IED securely between the mounting brackets by using the
required screws.
2 2
1
1
A
B
GUID-FCCEBD17-409F-4D7F-B984-10993D17E213 V1 EN
Figure 16: 4U main unit and external LHMI display
A
241.1 mm 1 Screws
B 101.6 mm 2 Mounting brackets
Section 4 1MRS755958 C
Mounting
32 630 series
Installation Manual