Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.11 Fitting the gas inlet casing, nozzle
ring (A180-L and larger)
© Copyright 2018 ABB. All rights reserved. HZTL4034_EN Revision N November 2018
8.11 Fitting the gas inlet casing, nozzle ring (A180-L
and larger)
Fitting the nozzle ring
u Coat the screw threads with high-temperature grease.
Fig.51: Looping around the nozzle ring (A180-L and larger)
u Loop around the nozzle ring (56001) with lifting gear on the nozzle ring holder (90477)
and fix on the crane.
Page 78 / 110
To Next Page