ACS 400 User’s Manual 31
Output Display
When the control panel is powered up, the panel displays the actual output frequency. Whenever
the MENU button is pressed and held, the control panel resumes this OUTPUT display.
To toggle between output frequency and output current, press the UP or DOWN button.
To set the output frequency, press ENTER. Pressing the UP/DOWN buttons changes the reference
immediately. Press ENTER again to return to OUTPUT display.
Menu Structure
ACS 400 has a large number of parameters. Of these, only the so-called basic parameters are
initially visible. The menu function -LG- is used to make the full parameter set visible.
Setting Parameter Value
Press ENTER to view the parameter value.
To set a new value, press and hold ENTER until SET is displayed.
Note! SET blinks if the parameter value is altered. SET is not displayed if the value cannot be
altered.
Note! To view the parameter default value, press the UP/DOWN buttons simultaneously.
OUTPUT
Hz
SET
OUTPUT
Hz
OUTPUT
A
ENTER
ENTER
ENTER
LOC
LOC
LOC
OUTPUT display Parameter groups Parameters
PAR
SET
s
MEN U
ENTER
ENTER
http://nicontrols.com
To Next Page
Loading...
