32 ACS 400 User’s Manual
Menu Functions
Scroll the Parameter groups for the desired menu function. Press and hold ENTER until the display
blinks to start the function.
Note! Parameter copying does not affect all parameters. The excluded parameters are: 9901,
9905-9910, 1605, 1607, 5002, 5201 and all Group 51 parameters. See “ACS 400 Complete
Parameter List” on page 65 for a description of these parameters.
Select between basic and full menu
Copy parameters from panel to drive (upload)
Note! Drive must be stopped and in local control. Parameter 1602
PARAMETER LOCK must be set to
1 (
OPEN).
Copy parameters from drive to panel (download)
Note! Drive must be stopped and in local control. Parameter 1602
PARAMETER LOCK must be set to
1 (
OPEN).
MENU
ENTER
Visible if Full menu
is active
Press and hold
Press &
MENU
ENTER
Press &
MENU
ENTER
http://nicontrols.com
To Next Page
Loading...
