ABB ACS 6000 - Changing Diodes and Thyristors in LSU; Required Tools and Accessories

ABB
ACS 6000 Maintenance Manual 3BHS202077 ZAB E01 Rev. C 3-1 (6)
Chapter 3 - Changing Diodes and Thyristors in LSU
The tools listed below are part of the tool set (ident. no. 3BHS130246)
delivered with the ACS 6000.
• Spreader tool
Figure 3-1 Spreader Tool
• ½ " reversible ratchet
• 100 mm ½ " extension bar
• 13 mm ½" hex socket
• Clamp pressure loading spanner
• Cable ties
3.1 Required Tools and Accessories