ABB ACS 6000 - Installing a Phase Module

Chapter 4 - Changing 3/5 MVA Phase Modules ABB
4-8 (10) 3BHS202077 ZAB E01 Rev. C ACS 6000 Maintenance Manual
1 Grease the four fastening bolts of the phase module with MOLYKOTE
(type D).
Figure 4-12 Greasing Fastening Bolts
2 Grease the ends of the busbar stubs using grease of type
RHODORSIL or SILICONPASTE 4. See arrows in
Figure 4-13 .
Figure 4-13 Greasing Busbar Stubs
3 Lift the phase module onto the rails by means of the ACS 6000 hoist
4.3 Installing a Phase Module