ABB ACS 6000 - Changing Diodes and IGCTs in 7;9 MVA Phase Modules; Required Tools and Accessories

ABB
ACS 6000 Maintenance Manual 3BHS202077 ZAB E01 Rev. C 8-1 (18)
Chapter 8 - Changing Diodes and IGCTs
in 7/9 MVA Phase Modules
The tools listed below are part of the tool set (ident. no. 3BHS130246)
delivered with the ACS 6000.
• Spreader tool
Figure 8-1 Spreader Tool
• Two 23 mm extra thin open end spanners
• Set of hex keys
• 10 mm combination spanner
• 13 mm ratcheting combination wrench
• ¼ " reversible ratchet
• 10 mm ¼" drive socket
• ½ " reversible ratchet
• 100 mm ½ " extension bar
• 12 mm ½" hex socket
• 13 mm ½" drive socket
• 18 mm hex ½" drive socket
• Torque wrench
• Cable ties
8.1 Required Tools and Accessories