About the manual
14
Categorization according to the frame size
The ACS350 with IP66 casing is manufactured in frame sizes R1 and R3. Some
instructions, technical data and dimensional drawings which only concern certain
frame sizes are marked with the symbol of the frame size (R1 or R3). To identify the
frame size of your drive, see the rating table on page 38 in chapter Technical data.
Product and service inquiries
Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to www.abb.com/drives
and
selecting Sales, Support and Service network.
Product training
For information on ABB product training, navigate to www.abb.com/drives and select
Training courses.
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to www.abb.com/drives, then
select successively Document Library – Manuals feedback form.
To Next Page
Loading...
