ABB ACS355 - Page 26

26 Start-up and controls
To select auto/manual mode in the control panel, follow these steps:
Step Description Keys Control panel
1 Press MENU to go to the main
menu.
2 Select PARAMETERS with the
UP/DOWN keys and press
ENTER.
3 Select 60 PUMP CONTROL
with the UP/DOWN keys and
press SEL.
4 Select the parameter 6001
AUTO/MANUAL SEL with the
UP/DOWN keys. Press EDIT
to change the parameter value.
5 Press the UP/DOWN keys to
change the parameter value.
For more details, see
parameter 6001
AUTO/MANUAL SEL.
Note: MANUAL is the default
selection.
REM
0r p m
DIR MENU
0.0 Hz
0.0 A
0.0 %
00:00
REM
MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER
00:00
1
REM
PAR GROUPS
60 PUMP CONTROL
98 OPTIONS
99 START-UP DATA
60
EXIT
SEL
00:00
01 OPERATING DATA
61 FLOW CALCULATION
REM
PARAMETERS
6004 PV CELL MIN VOLT
6003 START DC VOLT
6002 MANUAL START CMD
6001 AUTO/MANUAL SEL
MANUAL
EXIT
EDIT
00:00
REM
PAR EDIT
6001 AUTO/MANUAL SEL
MANUAL
CANCEL
SAVE
00:00
[1]