ABB ACS355 - Page 61

Actual signals and parameters 61
AC500
MODBUS
AC500 PLC macro. See Modbus macro in ACS355
User’s manual (3AUA0000066143 [English]).
10
LOAD FD SET FlashDrop parameter values as defined by the
FlashDrop file. For Parameter view, see 16 SYSTEM
CONTROLS in ACS355 User’s manual
(3AUA0000066143 [English]).
FlashDrop is an optional device for fast copying of
parameters to unpowered inverters. FlashDrop allows
easy customization of the parameter list. For example,
the selected parameters can be hidden. For more
information, see MFDT-01 FlashDrop user’s manual
(3AFE86591074 [English]).
31
USER S1 LOAD User 1 macro loaded into use.
Note: Before loading, check that the saved parameter
settings and the motor model are suitable for the
application.
0
USER S1 SAVE Save User 1 macro.
Stores the current parameter settings and the motor
model.
-1
USER S2 LOAD User 2 macro loaded into use.
Note: Before loading, check that the saved parameter
settings and the motor model are suitable for the
application.
-2
USER S2 SAVE Save User 2 macro.
Stores the current parameter settings and the motor
model.
-3
USER S3 LOAD User 3 macro loaded into use.
Note: Before loading, check that the saved parameter
settings and the motor model are suitable for the
application.
-4
USER S3 SAVE Save User 3 macro.
Stores the current parameter settings and the motor
model.
-5
9903 MOTOR TYPE Selects the motor type.
Note: Value cannot be changed while the inverter is
operating.
AM
AM Asynchronous motor 1
PMSM Permanent magnet synchronous motor 2
All parameters
No. Name/
Value
Description Def/ FbEq