ABB ACS560 - Page 114

DefaultUnitRange/ListNameIndex
-DI5[12]-DI2[9]DI5[6]DI2[3]Not used[0]
-DI6[13]-DI3[10]DI6[7]DI3[4]Used[1]
Other...-DI4[11]-DI1[8]DI4[5]DI1[2]
Override freq[3]-0...6Override reference source70.04
Process PID set
1[6]
Motor potentiomet-
er[4]
AI2[2]Constant
speed/freq[0]
Stop[5]Override
speed/freq[3]
AI1[1]
Forward[0]-0...13Override direction70.05
-DI5[12]-DI2[9]DI5[6]DI2[3]Forward[0]
-DI6[13]-DI3[10]DI6[7]DI3[4]Reverse[1]
Other...-DI4[11]-DI1[8]DI4[5]DI1[2]
0.0Hz-500.0...500.0Override frequency70.06
0.0rpm-30000.0...30000.0Override speed70.07
Fault on high pri-
ority[0]
-Fault on high prior-
ity[0], Autoreset[1]
Override fault handling70.20
5-0...5Override auto reset trials70.21
5.0 ss5.0...120.0 sOverride auto reset time70.22
71 External PID 1
0.00%-200000.00…200000.00External PID act value71.01
0.00%-200000.00…200000.00Feedback act value71.02
0.00%-200000.00…200000.00Setpoint act value71.03
0.00%-200000.00…200000.00Deviation act value71.04
--0000h…FFFFhPID status word71.06
114 Parameter listing
EN
HI